The running-in period is an important link to ensure the normal operation of the small wheel loader, reduce the failure rate and extend its service life. However, at present, some users ignore the spe...
1. Before starting the small wheel loader, check whether the engine oil and water are sufficient. Put all the operating levers in the neutral position, and start the machine at a low speed after passi...
The selection of models and configurations should generally be based on the following aspects: Operation functions The basic operation functions of forklifts are horizontal handling, stacking/picking,...
Use and maintenance of loaders 1. Since construction machinery is a special vehicle, operators should receive training and guidance from the manufacturer, have a full understanding of the structure an...
Winter weather is harsh and brutal, undoubtedly putting a strain on loaders, the tools that create our wealth. Here are some tips for winter maintenance of mini loaders. Come and take a look! 1. For v...
Introduction: After leaving the factory, loaders are generally required to undergo a run-in period of approximately 60 hours (sometimes called a "break-in period"). This is based on the articulated lo...
A loader is a type of earthmoving machinery widely used in construction projects such as highways, railways, buildings, hydropower, ports, and mines. It is mainly used for loading and unloading bulk m...
IPv6 network supported 
