The complete small wheel loader machine mainly consists of power system, transmission system, working device, working hydraulic system, steering hydraulic system, frame, operating system, braking syst...
1. General safety precautions ① Before using the front wheel loader, the driver and relevant personnel must carefully read the operating and maintenance instructions or operation and maintenance manua...
Wheel loaders are widely used as walking machines for earthwork transportation and loading, lifting and transporting loose and piled goods. On the one hand, as a tire mini wheel loader with high tract...
The oils commonly used in front end loader mainly include engine oil, engine diesel, torque converter/transmission oil (hydraulic transmission oil), drive axle oil, hydraulic oil used in hydraulic sys...
1. When the articulated front loader is driving, the bucket should be retracted and the bucket should be about 400-500mm off the ground. Pay attention to whether there are roadblocks or high-voltage w...
The wheel loader machine excavation and loading and unloading operations are achieved through the movement of its working device. Today, I will tell you about the driving and operating essentials of t...
Introduction: After the wheel loader machine leaves the factory, it is generally stipulated that there is a running-in period of about 60 hours (some are called the running-in period), which is stipul...
The running-in period is an important link to ensure the normal operation of the small wheel loader, reduce the failure rate and extend its service life. However, at present, some users ignore the spe...
IPv6 network supported 
