12 ton Big Industrial Forklift with Side Shift

Cheap 4.5 Ton Small 5 Ton Diesel Forklift with Single Front Tire Rated Capacity: 5 Ton/ 5000 kg Engine: Xichai 4D32/ISUZU Engine 6BG1/ MITSUBISH S6S Lifting Height: 3-6m (Duplex/Triple) Tyre: Pneumatic Tyre/Solid Tyre Details: Specifications: Model UNIT FD50TC Specifications Power Unit Diesel Operator Type Driver/seat Transmission Box Type Electronic hydraulic transmission Rated Capacity kg 5000 Load Center mm 600 Max.Lifting Height mm 3000 Tire Type Pneumatic Tyre Tire Number Front 2 Rear 2 Tire Size Front 300-15-18PR Rear 7.00-12-12PR Performance Lifting Speed Loaded mm/s 480 Unloaded 520 Lowering Speed  Loaded mm/s 480 Unloaded 450 Travelling Speed  Loaded km/h 19 Unloaded 20 Max.Gradeability (Loaded) % 20 Mast Tilting Angle (Fwd/Bwd) deg 6/12 Free Lifting Height mm 150 Turning Radius mm 2850 Dimensions Overall Length (with fork) mm 4300 Overall Width mm 1490 Overhead Guard Height 2255 Fork Size (LxWxT) mm 1220x150x55 Mast Height (Fork lowered) mm 2245 Battery (Voltage/Capacity) V/Ah 2×12/90 Truck Weight kg 6900 Fuel Tank Capacity L 140 Engine Brand Xichai ISUZU MITSUBISH Model 4D32 6BG1 S6S Rated Power kw/rpm 60/2200 82.3/2000 52/2300 Rated torque n-m/rpm 320/1400～1700 418/1500 248/1700 Number Of Cylinder 4 6 6 Displacement 6.49 4.996 Packing

8 Ton Diesel Forklift Truck with Spare Parts Rated Capacity: 8 Ton/ 8000 kg Engine: Chaochai 6102/ISUZU Engine 6BG1 Lifting Height: 3-6m (Duplex/Triple) Tyre: Pneumatic Tyre/Solid Tyre 8 tonne forklift Specifications: Model UNIT FD80T Specifications Power Unit Diesel Operator Type Driver/seat Transmission Box Type Electronic hydraulic transmission Rated Capacity kg 8000 Load Center mm 600 Max.Lifting Height mm 3000 Tire Type Pneumatic Tyre Tire Number  Front 4 Rear 2 Tire Size  Front 9.00×20-14PR Rear 8.25×15-14PR Performance Lifting Speed Loaded mm/s 400 Unloaded 420 Lowering Speed  Loaded mm/s 450 Unloaded 350 Travelling Speed  Loaded km/h 25 Unloaded 26 Max.Gradeability (Loaded) % 25 Max.Drawbar Pull (Loaded) kg 5600 Mast Tilting Angle (Fwd/Bwd) deg 6/12 Free Lifting Height mm 170 Turning Radius mm 3500 Dimensions Overall Length (with fork) mm 5350 Overall Width mm 2000 Overhead Guard Height mm 2560 Fork Size (LxWxT) mm 1220x175x70 Mast Height (Fork lowered) mm 2585 Battery (Voltage/Capacity) V/Ah 2×12/90 Truck Weight kg 11000 Fuel Tank Capacity L 170 Engine Brand  ISUZU CHAOCHAI Model 6BG1 6102 Rated Power kw/rpm 82.3/2000 80.8/250 Rated torque n-m/rpm 418/1500 354/1650 Number Of Cylinder 6 6 Displacement 6.49 5.78 Packing

Small Hydraulic Diesel Smart Manual 3.5 Tons 3500 KG Mini Forklift Truck with Triple 4.5 Meters Container Mast *The powerful engine with a stable high-efficiency transmission ensures full advantage of torque output *High-quality hydraulic elements specially designed for various working conditions *The well-designed mast provides safer operation and a wider front view. *Compact & refined body and reliable & firm overhead guard guarantees the unique charm of INTERQUIP forklift Specification Specification FD35 1 Fuel model Diesel 2 Load capacity kg 3500 3 Load center mm 500 4 Lift height mm 3000 5 Full free lift height mm 100 6 Fork dimension mm 1070×125×50 7 Mast tilting angle Deg. 6/12 8 Min.turning radius mm 2550 9 Groud clearance mm 135 10 Overhead guard height mm 2165 11 Front overhang mm 495 12 Max travel speed km/h 19 13 Max lift speed mm/s 480 14 Max.traction power KN 13.5 15 Max. gradeability % 20 16 Total length with fork mm 4065 17 Total length without fork mm 2995 18 Total width mm 1225 19 Mast extended height mm 4265 20 Mast lowered height mm 2060 21 Tyres Front 28x9-15-12PR 22 Type Rear 6.50-10-10PR 23 Wheelbase mm 1700 24 Tread mm 1000/970 25 Service weight Kg 4560 26 Battery V/Ah 12/80 27 Engine model XINCHAI    4D27G31 28 Engine power kw/r.p.m 36.8 29 Work press Mpa 18.5

0.9 / 900 kg Home / Farm / Garden New Smallest Mini Electric Hydraulic Pump Crawler Battery Digger Excavator for Sale Feature 1. Easy to operate, easy to operate device, in line with the new generation of ergonomics 2. Pure electric environmental protection design, its performance and noise have reached the highest level in Europe. 3. The reinforced track effectively enhances the wear resistance of the track and prolongs the service life of the track 4. Reasonable hydraulic layout greatly facilitates the inspection and maintenance of the hydraulic system. 5. Precise intelligent instrument. Specification Model E10  Electric Systems Baterry type  Li-ion battery pack Baterry capacity kW.h 7.68 System voltage v 51.2 Indicative runtime (typical duty cycle) hrs 4.5 Charging On-board charger Indicative charge time (on-board) hrs 8 @110v / 6@ 220v Off-board fast charge (optional) hrs 2@220 Motor type AC  Motor power (continuous / peak) HP (kw) (4/8) Operating Performance Operating weight  lb (kg) 2101(953) Standard bucket capacity cu.ft (cu.m) 0.78 (0.022) Max. arm digging force lb (kg) 1201(545) Max. bucket breakout force lb (kg) 1411(640) Max. traction force lb (kg) 1345(610) Max.boom cylinder lifting force lb (kg) 584(265) Unit swing speed rpm 8 *Boom swing angle left/right degree 65/55 Drive Performance Max travel speed mph (km/h) 1.24(2) Ground contact pressure psi (kpa) 4.35（30） Track type Rubber Gradeability % 30 Hydraulics Total hydraulic flow gal/min (L/min) 4.75（18） Max. operating pressure psi (mpa) 2610(18) Reservoir capacity gal (ltr) 3.17(12) Dimensions A   Overall transportation length ft. in. (mm) 8'9''(2720) B   Overall transportation width  ft. in. (mm) 2'8''(875) C   Overall transportaion height ft. in. (mm) 6'8''2077 D   Standard Width of bottom chassis ft. in. (mm) 2'7''(835)      * max.extend  ft. in. (mm) 3'2''(960)      * min. retract  ft. in. (mm) 2'5''(760) E   Track width  ft. in. (mm) 2'2''(657)       Rubber width in. (mm) 5.9''(180) F    *Tops canopy  max. height ft. in. (mm) 7'1''(2160)       *Rops canopy max.height ft. in. (mm) 7'0''(2140)       *Rops canopy min.height ft. in. (mm) 5'2''(1585) G   Max. digging height ft. in. (mm) 8'2''(2490) H   Max. dump height ft. in. (mm) 6'0''(1842) I     Max.diging depth ft. in. (mm) 5'6''(1720) J    Max. vertical dig depth ft. in. (mm) 5'3'' (1600) K   Max. digging radius @groud ft. in. (mm) 9'5''(2900) L    Maximum reach  ft. in. (mm) 9'8''(3000) M   blade Max. lift above ground in. (mm) 4.7''(120) N   blade Max. drop below ground in. (mm) 9.8''(250) O   Min. turning radius  ft.in. (mm) 4'5''(1380) P   Front transportation length ft. in. (mm) Q  Rear tansportation length ft. in. (mm) 2'4''(725) R  Left Horizontal distance ft. in. (mm) 1'4''(410) S  Right Horizontal distance ft. in. (mm) 1'6''(480) T  Min. tail turning radius ft. in. (mm) 2'8''(846) Note: 1.Operating weight includes 75kg driver weight and other optional parts. 2.Size with * is optional 3.The company reserves the right to change specifications without notice. This brochure is for descriptive purposes only. 4.For your safety, we strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt for almost all applications.

3.5 Ton 10 meter Telehandler Electric Telescopic Loader Forklift Discover our 3.5-ton electric telescopic loader forklift, featuring a 10-meter reach to handle diverse material handling tasks with efficiency and eco-friendliness. As an electric telehandler, it operates with low noise and zero emissions, making it ideal for indoor spaces, urban construction sites, and environmentally sensitive areas. Perfect for lifting, stacking, or moving loads in warehouses, farms, or industrial facilities, this model balances compact maneuverability with impressive lifting capacity. Whether you need to streamline operations in confined spaces or prioritize sustainability, this 3.5-ton, 10-meter electric telescopic loader is a smart, high-performance choice for your material handling needs. *Cummins QSB3.9-C130 (97KW) *Pneumatic Tires (16/70-20) *Two-section telescopic arm *System: torque converter *Pump: high-pressure plunger pump with constant pressure and load-sensitive functions *Valve: load-sensitive electronically controlled multi-way valve with constant power *Travel mode: four-turn four-wheel drive, crab travel * Front and rear axles: wet axles *Action mode: electronic control mode *Luxury cab: luxurious and smooth operating table/single cold air conditioning/LED lights/rear sliding windows, etc. *Brake system: hydraulic brake *Mechanical quick connection * Fork distance adjustment *Size:6100*2260*2540mm (Over length to front carriage) *Truck Weight:10500kg Specification Lifting capacity Capacity 3500Kg Max.lifting height 10m Max.frontreach 5.46m Weight and  size Length(To the fork carriage) 6.13m Overall Width 2.26m Overall Height 2.54m Wheelbase 3.3m Ground Clearance 0.4m Turning Radius 4m Empty load weight 10500Kg Cab width 0.9m Standard Tyre 16/70-20 Standard  Fork 1200×125×45 Performance lifting 15.5S Drop 11.6S External extension 16.5S Retract 11.9S lip over load 5S Down tipping (unloading) 5S Engine Brand Cummins Emission Standards III Model QSB3.9-C130 Number of Cylinders  Displacement 4 Rated Power 97Kw Maximum Torque 520N.m Transmission System Transmission method Hydrostatic transmission Number of gears F2R2 Max.speed 30km/h Brake form Double axle oil penetration multi disc brake Fuel Tank Capacity Hydraulic Oil 450L Diesel Oil 260L