The gearbox is one of the important transmission components of the front end loader. It is responsible for transmitting the speed and torque from the engine to the final drive system, changing th...
Front loading machine and forklifts are self-propelled earth-moving machinery that are hinged on the front of the chassis and consist of a boom, a linkage mechanism, and a loading bucket. They are use...
What is a front end loader weighing system Loaders and forklifts are self-propelled earth-moving machines that are equipped with a boom, a linkage mechanism and a loading bucket in front of the chassi...
How to perform loader repair and maintenance? To do a good job in the daily maintenance and upkeep of the loader, you must start by understanding the working conditions of each system every time you d...
1. What are the contents of front end wheel loader maintenance in winter? After the beginning of autumn comes winter, which is the maintenance period approaching winter. Many generator sets, marine en...
The correct operation method of the backhoe wheel loader: The flexible and correct operation method of the loader can be summarized as: one light, two stable, three points, four diligent, five coopera...
What oil should be added to the wheel loader machine gearbox? There are many kinds of gearboxes for loaders, and the oil they add is different. The gearbox of Shanggong loader needs hydraulic oil, the...
1. General safety precautions ① Before using the front wheel loader, the driver and relevant personnel must carefully read the operating and maintenance instructions or operation and maintenance manua...
The oils commonly used in front end loader mainly include engine oil, engine diesel, torque converter/transmission oil (hydraulic transmission oil), drive axle oil, hydraulic oil used in hydraulic sys...
1. When the articulated front loader is driving, the bucket should be retracted and the bucket should be about 400-500mm off the ground. Pay attention to whether there are roadblocks or high-voltage w...
The wheel loader machine excavation and loading and unloading operations are achieved through the movement of its working device. Today, I will tell you about the driving and operating essentials of t...
Introduction: After the wheel loader machine leaves the factory, it is generally stipulated that there is a running-in period of about 60 hours (some are called the running-in period), which is stipul...
IPv6 network supported 
