3 ton Electric/Battery Forklift with Curtis Control

2.5 Ton Triple 4.5 m Mast Electric/Battery Forklift with Side Shift Performance —Very small front suspension design, improved working stability, small self weight, reduced energy consumption, improved endurance —The driving motor is arranged horizontally, and the battery is sunk at the bottom of the vehicle to improve the driving stability —High speed ratio driving axle box assembly is adopted to improve working efficiency, improve climbing ability, reduce energy consumption and noise —New large screen LED instrument, good visibility, intuitive reading, friendly human-computer interface —Ergonomic anti fatigue seat, which can be adjusted at multiple angles according to the driver's needs —The operator can adjust the steering wheel according to his position Safety —AC drive regenerative braking —Handbrake parking brake —Pedal hydraulic service brake —Quick cut-off valve —Lowering speed limit valve —Tilt lock valve —Overload relief valve Specification  Item Description Unit FB25 Features Power Unit Lithium Battery Drive Mode Sit Type Rated Load Kg 2500 Loade Center Distance mm 500 Lifting Height mm 3000 Weight Deadweight kg 4250 Battery Weight kg 145 Deadweight without Battery kg 4250 Dimension Front Suspension mm 470 Wheelbase mm 1500 Mast Tilt Angle(Forward/backward) 。 6/12 Mast Static Height mm 2080 Free Lifting Height mm 140 Max.Height when lifting mm 4129 Overhead Guard Height mm 2130 Seat Height mm 130 Driver's Height mm 1110 Overall Length (till fork surface) mm 2369 Overall Width mm 1200 Fork Dimension（LxWxH） mm 1220×125×45 Min.Ground Clearance（full load） mm 125 Min.Truning Radius mm 2070 Tire Tie Type - Pneumatic Qty.of Tires（front/rear） - 2×/2 Front Tire Spec - 7.00-12-12PR Rear Tire Spec - 18X7-8-14PR Performance Travel Speed（full load/no load） km/h 13/15 Lifting Speed（full load/no load） mm/s 260/460 Max. Traction Forcefull load/no load kN 13.5/12.5 Gradeability full load/no load % 15/15 Drive System Travel Motor Power KW 11.1(AC) Working Motor Power KW 12(AC) Standard Battery (voltage/capacity) V/Ah Standard charger specifications (output) V/A 50.4/240

 Counterbalance 3.5 Ton Mini Electric/Battery Forklift Performance —Very small front suspension design, improved working stability, small self weight, reduced energy consumption, improved endurance —The driving motor is arranged horizontally, and the battery is sunk at the bottom of the vehicle to improve the driving stability —High speed ratio driving axle box assembly is adopted to improve working efficiency, improve climbing ability, reduce energy consumption and noise —New large screen LED instrument, good visibility, intuitive reading, friendly human-computer interface —Ergonomic anti fatigue seat, which can be adjusted at multiple angles according to the driver's needs —The operator can adjust the steering wheel according to his position Safety —AC drive regenerative braking —Handbrake parking brake —Pedal hydraulic service brake —Quick cut-off valve —Lowering speed limit valve —Tilt lock valve —Overload relief valve Specification  Item Description Unit FB35 Features Power Unit Lithium Battery Drive Mode Sit Type Rated Load Kg 3500 Loade Center Distance mm 500 Lifting Height mm 3000 Weight Deadweight kg 5450 Battery Weight kg 270 Deadweight without Battery kg 5450 Dimension Front Suspension mm 480 Wheelbase mm 1680 Mast Tilt Angle(Forward/backward) 。 6/12 Mast Static Height mm 2180 Free Lifting Height mm 150 Max.Height when lifting mm 4235 Overhead Guard Height mm 2150 Seat Height mm 130 Driver's Height mm 1130 Overall Length (till fork surface) mm 2595 Overall Width mm 1220 Fork Dimension（LxWxH） mm 1220×125×45 Min.Ground Clearance（full load） mm 125 Min.Truning Radius mm 2290 Tire Tie Type - Pneumatic Qty.of Tires（front/rear） - 2×/2 Front Tire Spec - 28X9-15 Rear Tire Spec - 18X7-8 Performance Travel Speed（full load/no load） km/h 13/15 Lifting Speed（full load/no load） mm/s 250/360 Max. Traction Forcefull load/no load kN 15.5/15.0 Gradeability full load/no load % 15/15 Drive System Travel Motor Power KW 16.6(AC) Working Motor Power KW 13.5(AC) Standard Battery (voltage/capacity) V/Ah 80/404 Standard charger specifications (output) V/A 80/100

Cheap 4.5 Ton Small 5 Ton Diesel Forklift with Single Front Tire Rated Capacity: 5 Ton/ 5000 kg Engine: Xichai 4D32/ISUZU Engine 6BG1/ MITSUBISH S6S Lifting Height: 3-6m (Duplex/Triple) Tyre: Pneumatic Tyre/Solid Tyre Details: Specifications: Model UNIT FD50TC Specifications Power Unit Diesel Operator Type Driver/seat Transmission Box Type Electronic hydraulic transmission Rated Capacity kg 5000 Load Center mm 600 Max.Lifting Height mm 3000 Tire Type Pneumatic Tyre Tire Number Front 2 Rear 2 Tire Size Front 300-15-18PR Rear 7.00-12-12PR Performance Lifting Speed Loaded mm/s 480 Unloaded 520 Lowering Speed  Loaded mm/s 480 Unloaded 450 Travelling Speed  Loaded km/h 19 Unloaded 20 Max.Gradeability (Loaded) % 20 Mast Tilting Angle (Fwd/Bwd) deg 6/12 Free Lifting Height mm 150 Turning Radius mm 2850 Dimensions Overall Length (with fork) mm 4300 Overall Width mm 1490 Overhead Guard Height 2255 Fork Size (LxWxT) mm 1220x150x55 Mast Height (Fork lowered) mm 2245 Battery (Voltage/Capacity) V/Ah 2×12/90 Truck Weight kg 6900 Fuel Tank Capacity L 140 Engine Brand Xichai ISUZU MITSUBISH Model 4D32 6BG1 S6S Rated Power kw/rpm 60/2200 82.3/2000 52/2300 Rated torque n-m/rpm 320/1400～1700 418/1500 248/1700 Number Of Cylinder 4 6 6 Displacement 6.49 4.996 Packing

Internal Combustion 2.5 Tons Diesel Forklift with 6 Meters Lifting Height *The powerful engine with a stable high-efficiency transmission ensures full advantage of torque output *High-quality hydraulic elements specially designed for various working conditions *The well-designed mast provides safer operation and a wider front view. *Compact & refined body and reliable & firm overhead guard guarantees the unique charm of INTERQUIP forklift Specification Model FD25 1 Fuel model Diesel 2 Load capacity kg 2500 3 Load center mm 500 4 Lift height mm 3000 5 Full free lift height mm 100 6 Fork dimension mm 1070×122×40 7 Mast tilting angle Deg. 6/12 8 Min.turning radius mm 2240 9 Groud clearance mm 120 10 Overhead guard height mm 2140 11 Front overhang mm 485 12 Max travel speed km/h 19 13 Max lift speed mm/s 550 14 Max.traction power KN 12.3 15 Max. gradeability % 20 16 Total length with fork mm 3610 17 Total length without fork mm 2540 18 Total width mm 1160 19 Mast extended height mm 4220 20 Mast lowered height mm 2060 21 Tyres Front 7.00-12-12PR 22 Type Rear 6.00-9-10PR 23 Wheelbase mm 1600 24 Tread mm 970/970 25 Service weight Kg 3800 26 Battery V/Ah 12/80 27 Engine model XINCHAI 4D27G31 28 Engine power kw/r.p.m 36.8 29 Work press Mpa 18.5

Engineering & Construction Machinery 51.5 ton Crawler Excavator for Sale *High-end first-class core configuration Isuzu engines comply with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Various working modes and optional sizes Specifications MODEL Unit ITQ 520.9 Operating weight  Ton 51.5 Bucket capacity  m³ 2.8-3.6 Engine model ISUZU 6WG1 CUMMINS QSM11 Rated power  kw/r/min 300/1800 299/1800 Volume of fuel tank L 650 Travel speed km/h 4.8/3.0 Swing speed r/min 8.6 Max climbing degree ° 70 Bucket digging force at power max ISO KN 298 Average grounding pressure KPA 86 Hydraulic pump model    InLine  V90N230DP K5V212DPH Maximum flow  L/min 414x2 385*2 Setting pressure  MPa 37 Volume of hydraulic tank  L 335 A  Overall length  mm 11600 B  Overall width mm 3340 C  Overall height （to top of boom） mm 4050 D  Overall height （to top of cab） mm 3280 E  Counterweight ground clearance  mm 1300 F  Min. ground clearance   mm 720 G  Tail swing radius mm 3845 H  Track grounding length  mm 4360 J  Track length mm 5390 K  Track gauge mm 2740 L  Track width mm 3340 M  Track shoe width mm 600 N  Turntable width  mm 3240 O  Max. digging height  mm 10000 P  Max. dumping height mm 6760 Q  Max. digging depth  mm 6260 R  Max. vertical wall digging depth mm 5620 S  Max. digging depth for 2.5m horizontal plane mm 6070 T  Max. digging reach  mm 10580 U  Max.digging reach at ground level  mm 10360 V  Min. swing radius   mm 4825 W  Max. height at min swing radius mm 9250 X Distance from swing center to rear  mm 3845 Z  Height of counterweight  mm 2860 A1 Grounding length (in transportation) mm 6520 Arm length  mm 2550 Boom length  mm 6560

20 Ton Backhoe Excavator Long Reach Compact Excavator *High-end first-class core configuration Yanmar engines comply with Stage III emissions, saving energy and fuel. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 205.9 Operating weight Ton 21.3 Bucket capacity  m³ 0.93 Engine model 广康QSB7.0 三菱 4M50 Rated power  kw/r/min  124/2000  118/2000 Volume of fuel tank L 420 Travel speed km/h 5.2/3.5 Swing speed r/min 11.5 Max climbing degree ° 70 Bucket digging force at power max   ISO KN 157 Average grounding pressure KPA 46.5 Hydraulic pump model EDDIE FMP112APDT  KPM K3V112DT Maximum flow  L/min 215*2 228*2 Setting pressure  MPa 37 Volume of hydraulic tank  L 246 A  Overall length  mm 9560 B  Overall width mm 2780 C  Overall height （to top of boom） mm 3040 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance  mm 1065 F  Min. ground clearance   mm 466 G  Tail swing radius  mm 2720 H  Track grounding length mm 3260 J  Track length  mm 4060 K  Track gauge mm 2180 L  Track width  mm 2780 M  Track shoe width  mm 600 N  Turntable width mm 2700 O  Max. digging height mm 9275 P  Max. dumping height  mm 6560 Q  Max. digging depth  mm 6515 R  Max. vertical wall digging depth  mm 5915 S  Max. digging depth for 2.5m horizontal plane mm 6380 T  Max. digging reach mm 9865 U  Max.digging reach at ground level   mm 9680 V  Min. swing radius  mm 3630 W  Max. height at min swing radius  mm 7670 X Distance from swing center to rear  mm 2720 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation)  mm 4850 Arm length mm 2900 Boom length mm 5700

Hydraulic 8 Ton Crawler Excavator with Break Machine Parts *High-end first-class core configuration Yanmar engines comply with Stage III emissions, saving energy and fuel. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Highly rigid new cab, quiet and comfortable Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 80.9 Operating weight  Ton 8.2 Bucket capacity  m³ 0.32 Engine model YANMAR 4TNV98T YANMAR 4TNV98 Rated power  kw/r/min 56.5/2200 46.3/2200 Volume of fuel tank  L 130 Travel speed  km/h 5.1/2.7 Swing speed r/min 10 Max climbing degree ° 70 Bucket digging force at power max ISO KN 52 Average grounding pressure KPA 30 Hydraulic pump model   InLine  HP3V80 Maximum flow  L/min 165 Setting pressure  MPa 32 Volume of hydraulic tank  L 90 A  Overall length  mm 6100 B  Overall width  mm 2300 C  Overall height （to top of boom） mm 2515 D  Overall height （to top of cab） mm 2680 E  Counterweight ground clearance mm 760 F  Min. ground clearance   mm 380 G  Tail swing radius  mm 1755 H  Track grounding length  mm 2150 J  Track length  mm 2760 K  Track gauge mm 1700 L  Track width  mm 2150 M  Track shoe width  mm 450 N  Turntable width  mm 2198 O  Max. digging height  mm 7165 P  Max. dumping height mm 5065 Q  Max. digging depth mm 4038 R  Max. vertical wall digging depth  mm 3505 S  Max. digging depth for 2.5m horizontal plane  mm 3680 T  Max. digging reach  mm 6330 U  Max.digging reach at ground level  mm 6180 V  Min. swing radius   mm 1795 W  Max. height at min swing radius  mm 5500 X Distance from swing center to rear mm 1755 Z  Height of counterweight  mm 1725 A1 Grounding length (in transportation)  mm 3700 Arm length mm 1650 Boom length mm 3710

Heavy Diesel Forklift 30 Ton Forklift Internal Combustion Truck with Capacities of 30000kg Diesel Forklift 30-ton diesel forklift (internal combustion truck) handles 30,000kg loads, ideal for ports, steel mills, and industrial yards. Powered by a robust diesel engine, it ensures reliable performance for container handling, cargo loading, and stacking. With a stable chassis, reinforced forks, and safety features like wet disc brakes, it balances power and security. The ergonomic cab boosts operator comfort, while its durability suits rough conditions. Perfect for streamlining heavy material handling tasks efficiently. Specifications Item  CPCD300 Features Rated Load Kg 30000 Load Center mm 1220 Wheelbase mm 4600 Weight Weight kg  36500 Chassis Tire Specs:Front   14.00-24 Tire Specs:Rear 14.00-24 Tires Qty,front/rear(X-dreve wheels) 4/2 Wheel tread:Front mm 2220 Wheel tread:Rear mm 2300 Dimensions Mast/carriage tilt angle(front/rear) Degree(°) 6/12 Mast height(fork lowering) mm 3970 Mast lifting height mm 4000 Max.height mm 5940 height to head guard(height to cab) mm 3480 Overall height（with forks)                                       mm 9460 Fork front verticaal sueface to the rear end of the vehicle  mm 7060 Overall width mm 3060 Fork dimension mm 2400*300*110 Fork carriage width mm 3000 Mast min ground(with load) mm 350 Wheelbase center min ground(with load) mm 450 Min.turning Radius mm 6600 Travel speed(with load/without load) km/h 24/28 Front overhang mm 1010 Rear overhang mm 1220 Performance Max.lifting speed(with load/without load) mm/s 260/280 tractionn KN 180 gradeability(with load/without load) % 20/22 Driving brake Hydraulic clamp disvc Engine Engine brand/model WeiChai Engine WD10G240E21（国二） Rated Output 175(Kw) Dongfeng cummins 6CTA8.3-C240-II Rated Output 179(Kw) Cylinder No 6 Others Transmission gears(Front/rear) 2/1