4 Ton LPG&Gasoline/Gas/Petrol Forklift with Block Clamp

0.9 / 900 kg Home / Farm / Garden New Smallest Mini Electric Hydraulic Pump Crawler Battery Digger Excavator for Sale Feature 1. Easy to operate, easy to operate device, in line with the new generation of ergonomics 2. Pure electric environmental protection design, its performance and noise have reached the highest level in Europe. 3. The reinforced track effectively enhances the wear resistance of the track and prolongs the service life of the track 4. Reasonable hydraulic layout greatly facilitates the inspection and maintenance of the hydraulic system. 5. Precise intelligent instrument. Specification Model E10  Electric Systems Baterry type  Li-ion battery pack Baterry capacity kW.h 7.68 System voltage v 51.2 Indicative runtime (typical duty cycle) hrs 4.5 Charging On-board charger Indicative charge time (on-board) hrs 8 @110v / 6@ 220v Off-board fast charge (optional) hrs 2@220 Motor type AC  Motor power (continuous / peak) HP (kw) (4/8) Operating Performance Operating weight  lb (kg) 2101(953) Standard bucket capacity cu.ft (cu.m) 0.78 (0.022) Max. arm digging force lb (kg) 1201(545) Max. bucket breakout force lb (kg) 1411(640) Max. traction force lb (kg) 1345(610) Max.boom cylinder lifting force lb (kg) 584(265) Unit swing speed rpm 8 *Boom swing angle left/right degree 65/55 Drive Performance Max travel speed mph (km/h) 1.24(2) Ground contact pressure psi (kpa) 4.35（30） Track type Rubber Gradeability % 30 Hydraulics Total hydraulic flow gal/min (L/min) 4.75（18） Max. operating pressure psi (mpa) 2610(18) Reservoir capacity gal (ltr) 3.17(12) Dimensions A   Overall transportation length ft. in. (mm) 8'9''(2720) B   Overall transportation width  ft. in. (mm) 2'8''(875) C   Overall transportaion height ft. in. (mm) 6'8''2077 D   Standard Width of bottom chassis ft. in. (mm) 2'7''(835)      * max.extend  ft. in. (mm) 3'2''(960)      * min. retract  ft. in. (mm) 2'5''(760) E   Track width  ft. in. (mm) 2'2''(657)       Rubber width in. (mm) 5.9''(180) F    *Tops canopy  max. height ft. in. (mm) 7'1''(2160)       *Rops canopy max.height ft. in. (mm) 7'0''(2140)       *Rops canopy min.height ft. in. (mm) 5'2''(1585) G   Max. digging height ft. in. (mm) 8'2''(2490) H   Max. dump height ft. in. (mm) 6'0''(1842) I     Max.diging depth ft. in. (mm) 5'6''(1720) J    Max. vertical dig depth ft. in. (mm) 5'3'' (1600) K   Max. digging radius @groud ft. in. (mm) 9'5''(2900) L    Maximum reach  ft. in. (mm) 9'8''(3000) M   blade Max. lift above ground in. (mm) 4.7''(120) N   blade Max. drop below ground in. (mm) 9.8''(250) O   Min. turning radius  ft.in. (mm) 4'5''(1380) P   Front transportation length ft. in. (mm) Q  Rear tansportation length ft. in. (mm) 2'4''(725) R  Left Horizontal distance ft. in. (mm) 1'4''(410) S  Right Horizontal distance ft. in. (mm) 1'6''(480) T  Min. tail turning radius ft. in. (mm) 2'8''(846) Note: 1.Operating weight includes 75kg driver weight and other optional parts. 2.Size with * is optional 3.The company reserves the right to change specifications without notice. This brochure is for descriptive purposes only. 4.For your safety, we strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt for almost all applications.

Heavy Diesel Forklift 30 Ton Forklift Internal Combustion Truck with Capacities of 30000kg Diesel Forklift 30-ton diesel forklift (internal combustion truck) handles 30,000kg loads, ideal for ports, steel mills, and industrial yards. Powered by a robust diesel engine, it ensures reliable performance for container handling, cargo loading, and stacking. With a stable chassis, reinforced forks, and safety features like wet disc brakes, it balances power and security. The ergonomic cab boosts operator comfort, while its durability suits rough conditions. Perfect for streamlining heavy material handling tasks efficiently. Specifications Item  CPCD300 Features Rated Load Kg 30000 Load Center mm 1220 Wheelbase mm 4600 Weight Weight kg  36500 Chassis Tire Specs:Front   14.00-24 Tire Specs:Rear 14.00-24 Tires Qty,front/rear(X-dreve wheels) 4/2 Wheel tread:Front mm 2220 Wheel tread:Rear mm 2300 Dimensions Mast/carriage tilt angle(front/rear) Degree(°) 6/12 Mast height(fork lowering) mm 3970 Mast lifting height mm 4000 Max.height mm 5940 height to head guard(height to cab) mm 3480 Overall height（with forks)                                       mm 9460 Fork front verticaal sueface to the rear end of the vehicle  mm 7060 Overall width mm 3060 Fork dimension mm 2400*300*110 Fork carriage width mm 3000 Mast min ground(with load) mm 350 Wheelbase center min ground(with load) mm 450 Min.turning Radius mm 6600 Travel speed(with load/without load) km/h 24/28 Front overhang mm 1010 Rear overhang mm 1220 Performance Max.lifting speed(with load/without load) mm/s 260/280 tractionn KN 180 gradeability(with load/without load) % 20/22 Driving brake Hydraulic clamp disvc Engine Engine brand/model WeiChai Engine WD10G240E21（国二） Rated Output 175(Kw) Dongfeng cummins 6CTA8.3-C240-II Rated Output 179(Kw) Cylinder No 6 Others Transmission gears(Front/rear) 2/1

Rated Capacity: 2.5 Ton/ 2500 kg Engine: Xinchai C490/ISUZU Engine C240/ MITSUBISH S4S Lifting Height: 3-6m (Duplex/Triple) Tyre: Pneumatic Tyre/Solid Tyre Feature:  -- Reasonable layout of hose and hard pipe, reduce oil pressure loss; -- The mature and reliable engine provides plenty of power; -- The super large capacity aluminum tube belt radiator and optimized heat dissipation channel further improve the heat dissipation capacity of the vehicle; -- The enhanced transmission system has stronger shock resistance and bump resistance. Specifications: Model UNIT FD25T Specifications Power Unit   Diesel Operator Type   Driver/Seat Transmission Box Type   Automatic Transmission Rated Capacity kg 2500 Load Center mm 500 Max.Lifting Height mm 3000 Tire Type   Pneumatic Tire Tire Number Front   2 Rear 2 Tire Size Front   7.00-12-12PR Rear 6.0-9-10PR Performance Lifting Speed Loaded mm/s 550 Unloaded 580 Lowering Speed Loaded mm/s 480 Unloaded 450 Travelling Speed Loaded km/h 20 Unloaded 21 Max.Gradeability (Loaded) % 20 Max.Drawbar Pull (Loaded) kn 14 Mast Tilting Angle (Fwd/Bwd) deg 6/12 Free Lifting Height mm 140 Turning Radius mm 2210 Dimensions Overall Length (with fork) mm 3660 Overall Width mm 1150 Overhead Guard Height mm 2125 Fork Size (LxWxT) mm 1220×122×40 Mast Height (Fork lowered) mm 2090 Battery (Voltage/Capacity) V/Ah 12/90 Truck Weight kg 3765 Fuel Tank Capacity L 70 Engine Brand   XINCHAI MITSUBISH ISUZU Model   C490 S4S C240 Rated Power kw/rpm 40/2650 35.3/2250 35.4/2500 Rated torque n-m/rpm 160/1600-2000 169/1700 137.7/1800 Number Of Cylinder   4 4 4 Displacement   2.67 2.49 2.37 Packing

Big Montacargas Forklift Truck 16 Ton Diesel Forklift with Fork Positioner Specifications Item  CPCD160 Features Rated Load Kg 16000 Load Center mm 900 Wheelbase mm 3800 Weight Weight kg  24000 Chassis Tire Specs:Front   12.00-24 Tire Specs:Rear 12.00-20 Tires Qty,front/rear(X-dreve wheels) 4/2 Wheel tread:Front mm 2070 Wheel tread:Rear mm 2130 Dimensions Mast/carriage tilt angle(front/rear) Degree(°) 6/12 Mast height(fork lowering) mm 3520 Mast lifting height mm 3500 Max.height mm 5240 height to head guard(height to cab) mm 3210 Overall height（with forks)                                       mm 7530 Fork front verticaal sueface to the rear end of the vehicle  mm 5730 Overall width mm 2750 Fork dimension mm 1800*200*100 Fork carriage width mm 2700 Mast min ground(with load) mm 300 Wheelbase center min ground(with load) mm 350 Min.turning Radius mm 5340 Travel speed(with load/without load) km/h 22/30 Front overhang mm 920 Rear overhang mm 960 Performance Max.lifting speed(with load/without load) mm/s 240/300 traction KN 130 gradeability(with load/without load) % 20/22 Driving brake Hydraulic clamp disvc Engine Engine brand/model WeiChai Engine WP6G175E22（国二） Rated Output 129(Kw) Dongfeng cummins 6BTAA5.9-C190-II Rated Output 142(Kw) Cylinder No 6 Others Transmission gears(Front/rear) 2/1