Automatic Transmission 3.5 Ton LPG&Gasoline/Gas/Petrol Forklift

6 Ton New Generation Cheap Wheel Loader Model ITQ968H Specifications Operating weight 19,500 kg Rated load 6,000 kg Bucket capacity 3.5 m³ Overall length 8380mm Overall width 3100mm Overall height 3560mm Bucket width 3170mm Wheel base 3350mm Track base 2360mm Min. ground clearance 470mm Max. dumping height 3300mm Max.dumping reach 1290mm Performance Driving speed    Forward 1 0-8.5km/h Forward 2 0-16.5km/h Reverse 1 0-8.5km/h Grade ability 28° Hydraulic torque converter single stage,4elements Transmission counter shaft Raise time ≤6.8s Total ≤12.5s Tire type 26.5-25  Engine Engine model WEICHAI WD10G270E201 Rated power 199kw Rated rotate speed 2000r/min Max. torque 920n.m Breakout force ≥200 kn

0.9 / 900 kg Home / Farm / Garden New Smallest Mini Electric Hydraulic Pump Crawler Battery Digger Excavator for Sale Feature 1. Easy to operate, easy to operate device, in line with the new generation of ergonomics 2. Pure electric environmental protection design, its performance and noise have reached the highest level in Europe. 3. The reinforced track effectively enhances the wear resistance of the track and prolongs the service life of the track 4. Reasonable hydraulic layout greatly facilitates the inspection and maintenance of the hydraulic system. 5. Precise intelligent instrument. Specification Model E10  Electric Systems Baterry type  Li-ion battery pack Baterry capacity kW.h 7.68 System voltage v 51.2 Indicative runtime (typical duty cycle) hrs 4.5 Charging On-board charger Indicative charge time (on-board) hrs 8 @110v / 6@ 220v Off-board fast charge (optional) hrs 2@220 Motor type AC  Motor power (continuous / peak) HP (kw) (4/8) Operating Performance Operating weight  lb (kg) 2101(953) Standard bucket capacity cu.ft (cu.m) 0.78 (0.022) Max. arm digging force lb (kg) 1201(545) Max. bucket breakout force lb (kg) 1411(640) Max. traction force lb (kg) 1345(610) Max.boom cylinder lifting force lb (kg) 584(265) Unit swing speed rpm 8 *Boom swing angle left/right degree 65/55 Drive Performance Max travel speed mph (km/h) 1.24(2) Ground contact pressure psi (kpa) 4.35（30） Track type Rubber Gradeability % 30 Hydraulics Total hydraulic flow gal/min (L/min) 4.75（18） Max. operating pressure psi (mpa) 2610(18) Reservoir capacity gal (ltr) 3.17(12) Dimensions A   Overall transportation length ft. in. (mm) 8'9''(2720) B   Overall transportation width  ft. in. (mm) 2'8''(875) C   Overall transportaion height ft. in. (mm) 6'8''2077 D   Standard Width of bottom chassis ft. in. (mm) 2'7''(835)      * max.extend  ft. in. (mm) 3'2''(960)      * min. retract  ft. in. (mm) 2'5''(760) E   Track width  ft. in. (mm) 2'2''(657)       Rubber width in. (mm) 5.9''(180) F    *Tops canopy  max. height ft. in. (mm) 7'1''(2160)       *Rops canopy max.height ft. in. (mm) 7'0''(2140)       *Rops canopy min.height ft. in. (mm) 5'2''(1585) G   Max. digging height ft. in. (mm) 8'2''(2490) H   Max. dump height ft. in. (mm) 6'0''(1842) I     Max.diging depth ft. in. (mm) 5'6''(1720) J    Max. vertical dig depth ft. in. (mm) 5'3'' (1600) K   Max. digging radius @groud ft. in. (mm) 9'5''(2900) L    Maximum reach  ft. in. (mm) 9'8''(3000) M   blade Max. lift above ground in. (mm) 4.7''(120) N   blade Max. drop below ground in. (mm) 9.8''(250) O   Min. turning radius  ft.in. (mm) 4'5''(1380) P   Front transportation length ft. in. (mm) Q  Rear tansportation length ft. in. (mm) 2'4''(725) R  Left Horizontal distance ft. in. (mm) 1'4''(410) S  Right Horizontal distance ft. in. (mm) 1'6''(480) T  Min. tail turning radius ft. in. (mm) 2'8''(846) Note: 1.Operating weight includes 75kg driver weight and other optional parts. 2.Size with * is optional 3.The company reserves the right to change specifications without notice. This brochure is for descriptive purposes only. 4.For your safety, we strongly recommends the use of a Rollover Protective Structure (ROPS) and seat belt for almost all applications.

5 Ton Construction Machinery 3 cubic wheel loader Bucket Capacity: 3 m3 Operating Weight: 17100 kg Rated Power: 162 kw Model ITQ958 Specifications Operating weight 17,100 kg Rated load 5,000 kg Bucket capacity 3 m³ Overall length 7950 mm Overall width 2870 mm Overall height 3500 mm Bucket width 3000 mm Wheel base 3300 mm Track base 2260 mm Min. ground clearance 470 mm Max. dumping height 3300 mm Max.dumping reach 1400 mm Performance Driving speed    Forward 1 0-11.5 km/h Forward 2 0-38 km/h Reverse 1 0-16 km/h Grade ability 28° Hydraulic torque converter single stage,4 elements Transmission planet-type Raise time ≤6.8 s Total ≤12.5 s Tire type 23.5-25   20 pr Engine Engine model weichai wd10g220e23 cummins 6cta8.3-c215 Rated power 162 kw Rated rotate speed 2000 r/min Max. torque ≥745.3 n.m Breakout force 145 kn

Construction New Manufacture Custom 24 Tons Hydraulic Mining Diggers *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications MODEL Unit ITQ 240.9 Operating weight  Ton 24 Bucket capacity  m³ 1.2 Engine model  康明斯QSB7.0 Rated power kw/r/min  142/1950 Volume of fuel tank L 420 Travel speed  km/h 5.2/3.5 Swing speed r/min 11 Max climbing degree ° 70 Bucket digging force at power max ISO KN 172 Average grounding pressure KPA 49.4 Hydraulic pump model KPM  K3V112DT Maximum flow  L/min 228x2 Setting pressure  MPa 37 Volume of hydraulic tank  L 246 A  Overall length mm 9850 B  Overall width mm 2980 C  Overall height （to top of boom） mm 3190 D  Overall height （to top of cab） mm 3120 E  Counterweight ground clearance mm 1065 F  Min. ground clearance   mm 440 G  Tail swing radius mm 2810 H  Track grounding length  mm 3640 J  Track length mm 4450 K  Track gauge mm 2380 L  Track width mm 2980 M  Track shoe width mm 600 N  Turntable width  mm 2700 O  Max. digging height mm 9310 P  Max. dumping height  mm 6440 Q  Max. digging depth mm 6875 R  Max. vertical wall digging depth  mm 5860 S  Max. digging depth for 2.5m horizontal plane mm 6680 T  Max. digging reach  mm 10170 U  Max.digging reach at ground level  mm 9990 V  Min. swing radius  mm 3975 W  Max. height at min swing radius mm 7775 X Distance from swing center to rear  mm 2810 Z  Height of counterweight  mm 2120 A1 Grounding length (in transportation)  mm 5360 Arm length  mm 3050 Boom length  mm 5850