Small Front End Wheel Loader for Farm Agriculture Landscaping

Compact/Articulated/Multifunctional with CE/TUV Yanmar/Electronic/Battery/Kubota/Perkins Euro 5 Engine 700kg/0.7Ton Small/Mini Loader for Sales/Garden/Farm Product features： Four wheel drive, full power. Advanced AC controller and CANbus data bus technology Long endurance of the equipment Can be turned over to facilitate maintenance Comfortable operation and stable driving Pure electric system has the advantages of high efficiency Zero exhaust emission Low noise Environmental protection and energy saving Suitable for indoor and outdoor use with lower cost Optional Attachment   Specification Main parameter Operating weight 2450Kg Load rating 700Kg Moving speed 0-18km/h Moving motor Motor type           Permanent magnet synchronous motor Rated power of motor 20kw Motor Duty Rating Duty with non-periodic load and speed variations Oil Pump Motor Rated power of motor 10Kw Motor Duty Rating Duty with non-periodic load and speed variations Battery Battery Type Lithium iron phosphate Battery Voltage 144V Battery rated capacity 155Ah(standard) Battery weight 260Kg Charging time AC220V Charge:3h Operating time with full load 3.5h Operating time with rated load 4-5h Intermittent operation time 5-6h Theoretical lifespan 25 ℃ 0.5c charge and discharge for 3000 times, and the capacity shall not be less than 80% of the nominal capacity Driving system Operating voltage of driving system 144V  Electrical system Voltage of electrical system 12V Tripping load with bucket(Refer to ISO8313) Tripping load  when  straight line driving   1250Kg Tripping load  when  full turn 900Kg Hydraulic drive system Displacement 12 cc Working pressure 170bar Hydraulic oil capacity 30L Tyre Specifications 26Í12-12 AS Total width 1104mm Dimension Width of protective device 990mm Ground clearance 178mm Tire center width 803mm Total width 1104mm Maximum working height 3630mm Maximum bucket fulcrum height 2900mm Bucket level status height 2649mm Tipping height 2228mm Working distance (tipping state) 690mm Shovel depth 120mm Pivot to bucket lift pin 550mm wheelbase 1550mm Rear overhang 948mm Total length without bucket 3550mm Total length with standard bucket 4330mm Seat height 1208mm Height to top of protective device 2290mm Angle of maximum lifting height 48º Maximum tipping angle 45º Departure angle 24º Corner 45º Maximum turning radius 2530mm Outer edge radius 2200mm Inner turning radius 1110mm

New Generation Agricultural Machinery Construction Small Front End Wheel Loader with CE 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   918 Rated load kg 1500 Operation total weight kg 3800 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 2100 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3800 Max unloading height mm 3200 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29

China Brand New Small Wheel Loader Farming/Construction/Gardening 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   918 Rated load kg 1500 Operation total weight kg 3800 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 2100 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3800 Max unloading height mm 3200 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29

400 kg 600 kg 700 kg 800 kg Diesel / Electric Mini Wheel Loader for Farm/Garden Product features： Four wheel drive, full power. Advanced AC controller and CANbus data bus technology Long endurance of the equipment Can be turned over to facilitate maintenance Comfortable operation and stable driving Pure electric system has the advantages of high efficiency Zero exhaust emission Low noise Environmental protection and energy saving Suitable for indoor and outdoor use with lower cost Optional Attachment Specification Main parameter Operating weight 2450Kg Load rating 700Kg Moving speed 0-18km/h Moving motor Motor type           Permanent magnet synchronous motor Rated power of motor 20kw Motor Duty Rating Duty with non-periodic load and speed variations Oil Pump Motor Rated power of motor 10Kw Motor Duty Rating Duty with non-periodic load and speed variations Battery Battery Type Lithium iron phosphate Battery Voltage 144V Battery rated capacity 155Ah(standard) Battery weight 260Kg Charging time AC220V Charge:3h Operating time with full load 3.5h Operating time with rated load 4-5h Intermittent operation time 5-6h Theoretical lifespan 25 ℃ 0.5c charge and discharge for 3000 times, and the capacity shall not be less than 80% of the nominal capacity Driving system Operating voltage of driving system 144V  Electrical system Voltage of electrical system 12V Tripping load with bucket(Refer to ISO8313) Tripping load  when  straight line driving   1250Kg Tripping load  when  full turn 900Kg Hydraulic drive system Displacement 12 cc Working pressure 170bar Hydraulic oil capacity 30L Tyre Specifications 26Í12-12 AS Total width 1104mm Dimension Width of protective device 990mm Ground clearance 178mm Tire center width 803mm Total width 1104mm Maximum working height 3630mm Maximum bucket fulcrum height 2900mm Bucket level status height 2649mm Tipping height 2228mm Working distance (tipping state) 690mm Shovel depth 120mm Pivot to bucket lift pin 550mm wheelbase 1550mm Rear overhang 948mm Total length without bucket 3550mm Total length with standard bucket 4330mm Seat height 1208mm Height to top of protective device 2290mm Angle of maximum lifting height 48º Maximum tipping angle 45º Departure angle 24º Corner 45º Maximum turning radius 2530mm Outer edge radius 2200mm Inner turning radius 1110mm

Brand New Agriculture Small Front End Wheel Loader 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   916 Rated load kg 1200 Operation total weight kg 3500 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 1800 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3500 Max unloading height mm 3000 max unloading distance mm 800 Max steering angle ° 32 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29

Construction Machinery Small Front End Wheel Loader 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   920 Rated load kg 1800 Operation total weight kg 4700 Overall Length mm 5700 Overall Width mm 2000 Overall Height mm 2850 Spread of axles mm 2250 Wheelbase mm 2200 ground clearance mm 240 Bucket width mm 2000 Turning radius (tyre center) mm 4800 Turning radius (outside of bucket in transportation position) mm 5800 Max Working height mm 4000 Max unloading height mm 3500 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   1670-20 Rated power (Yunnei)  kW 76 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 1 Bucket capacity(Long arm)option m³ 1 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 120 Max traction KN 110 Max climbing ablity ° 29

Small Wheel Loader Front End Loder in Agriculture 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   925 Rated load kg 2500 Operation total weight kg 5800 Overall Length mm 6100 Overall Width mm 2100 Overall Height mm 2850 Spread of axles mm 2050 Wheelbase mm 2250 ground clearance mm 240 Bucket width mm 2200 Turning radius (tyre center) mm 4800 Turning radius (outside of bucket in transportation position) mm 5800 Max Working height mm 4000 Max unloading height mm 3500 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   1670-24 Rated power (Yunnei)  kW 92 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 1.3 Bucket capacity(Long arm)option m³ 1.3 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 120 Max traction KN 110 Max climbing ablity ° 29

3 ton Electric/Battery Forklift with Curtis Control —AC drive regenerative braking —Handbrake parking brake —Pedal hydraulic service brake —Quick cut-off valve —Lowering speed limit valve —Tilt lock valve -3 ton electric forklift —Overload relief valve Specification  Item Description Unit FB30 Features Power Unit Lithium Battery Drive Mode Sit Type Rated Load Kg 3000 Loade Center Distance mm 500 Lifting Height mm 3000 Weight Deadweight kg 5000 Battery Weight kg 270 Deadweight without Battery kg 4730 Dimension Front Suspension mm 475 Wheelbase mm 1680 Mast Tilt Angle(Forward/backward) 。 6/12 Mast Static Height mm 2100 Free Lifting Height mm 145 Max.Height when lifting mm 4235 Overhead Guard Height mm 2150 Seat Height mm 130 Driver's Height mm 1130 Overall Length (till fork surface) mm 2530 Overall Width mm 1220 Fork Dimension（LxWxH） mm 1220×125×45 Min.Ground Clearance（full load） mm 125 Min.Truning Radius mm 2210 Tire Tie Type - Pneumatic Qty.of Tires（front/rear） - 2×/2 Front Tire Spec - 28X9-15-14PR Rear Tire Spec - 18X7-8-14PR Performance Travel Speed（full load/no load） km/h 13/15 Lifting Speed（full load/no load） mm/s 275/420 Max. Traction Forcefull load/no load kN 15.7/16.2 Gradeability full load/no load % 15/15 Drive System Travel Motor Power KW 16.6(AC) Working Motor Power KW 13.5(AC) Standard Battery (voltage/capacity) V/Ah 80/404 Standard charger specifications (output) V/A 80/100