Two Driver 2.5ton Diesel Off-Road All Terrain Rough Terrain Forklift

Two Driver 3.5 Ton Rough Terrain Forklift Advantages of compact all terrain forklift: 1. Adopt four-wheel drive. 2. The chassis is high. 3. Mini all terrain forklift can work on ordinary roads, and can also work on rough roads on mountain roads and mud roads. The tires have strong grip and do not slip. 4. The engine is powerful, and it adopts all-wheel drive and off-road tires. 5. It can run on hills, mountains, beaches, sand, snow, ice and muddy roads, and has good off-road performance. Specifications: Specifications Power Unit Diesel Operator Type Driver/Seat Transimission Bo× Type Automatic Transmission Rated Capacity kg 3500 Load Center mm 500 Max.Lifting Height mm 3000 Tire Type Pneumatic Tire Tire Size Front 12-16.5-14PR Rear 27x10-12-12PR Performance Lifting Speed Loaded mm/s 420 Lowering Speed Loaded mm/s 600 Unloaded 300 Traveling Speed Unloaded mm/s 22 Service brake Hydraulic - Pedal Parking brake Mechanical - Manual Max.Gradeability (Loaded) % 16 Front suspension mm 590 Minimum turning radius 2910 Mast Tilting Angle (Fwd/Bwd) deg 5/15 Dimensions Wheelbase mm 1850 Wheel base (front/rear) mm 1300/1205 Minimum ground clearance Mast mm 220 midpoint of the wheelbase 310 Over Length mm 2940 Over Width mm 1550 Overhead Guard Height mm 2210 Fork Size (L×W×T) mm 55x122x1070 Mast Height (Fork lowered) mm 2140 Battery (Voltage/Capacity) V/Ah 12/90 Truck Weight kg 4930 Engine Brand  XINCHANG Model 4D30G31 Rated Power kw/rpm 36.8/2650 Rated torque n-m/rpm 174/1800 Displacement L 2.98

4X4WD Rough Terrain Forklift Truck with Japanese Yanmar Engine Advantages of rough terrain forklifts: 1. Adopt four-wheel drive. 2. The chassis is high. 3. It can work on ordinary roads, and can also work on rough roads on mountain roads and mud roads. The tires have strong grip and do not slip. 4. The engine is powerful, and it adopts all-wheel drive and off-road tires. 5. It can run on hills, mountains, beaches, sand, snow, ice and muddy roads, and has good off-road performance. Specifications: Specifications Power Unit Diesel Operator Type Driver/Seat Transimission Bo× Type Automatic Transmission Rated Capacity kg 3500 Load Center mm 500 Max.Lifting Height mm 3000 Tire Type Tire Size Front 12-16.5-10PR Rear 12-16.5-10PR Performance Lifting Speed Loaded mm/s 420 Lowering Speed Loaded mm/s 600 Unloaded 300 Traveling Speed Unloaded mm/s 22 Service brake Hydraulic - Pedal Parking brake Mechanical - Manual Max.Gradeability (Loaded) % 16 Front suspension mm 590 Minimum turning radius 2910 Mast Tilting Angle (Fwd/Bwd) deg 5/15 Dimensions Wheelbase mm 1840 Wheel base (front/rear) mm 1250/1320 Minimum ground clearance mm midpoint of the wheelbase 250 Over Length mm 3090 Over Width mm 1600 Overhead Guard Height mm 2450 Fork Size (L×W×T) mm 45x150x1070 Mast Height (Fork lowered) mm 2235 Battery (Voltage/Capacity) V/Ah 12/80 x 2 pcs Truck Weight kg 5100 Engine Brand  Model YN4H055-34VE Rated Power kw/rpm 36.8/2400 Rated torque n-m/rpm 185/1600-1800 Displacement L 2.543

China Brand New Small Wheel Loader Farming/Construction/Gardening 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   918 Rated load kg 1500 Operation total weight kg 3800 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 2100 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3800 Max unloading height mm 3200 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29

3 Ton front end wheel loader Bucket Capacity: 1.7 m3 Operating Weight: 10100 kg Rated Power: 92 kw Features: 1.electronic transmission  2.joystick controller  3.radio, driving recorder, reversing image; 4.suspension seat 5.air-conditioner Specifications Model ITQ935 Specifications Operating weight 10,100 kg Rated load 3,000 kg Bucket capacity 1.7 m³ Overall length 7200 mm Overall width 2350 mm Overall height 3200 mm Wheel base 2850 mm Track base 1800 mm Min. ground clearance 450 mm Max. dumping height 3400 mm Max.dumping reach 1290 mm Performance Driving speed    Forward 1 0-8 km/h Forward 2 0-13.5 km/h Forward3 0-25 km/h Forward4 0-36 km/h Reverse 1 0-9.5 km/h Reverse2 0-30 km/h Grade ability 28° Transmission counter shaft Raise time ≤6.8 s Fuel tank 180 L Total ≤12.5 s Tire type 17.5-25  Engine Engine model Deutz WP6G125E22 Rated power 92 kw Rated rotate speed 2200 r/min Max. torque 500 n.m Breakout force 98 kn

6 Ton New Generation Cheap Wheel Loader Model ITQ968H Specifications Operating weight 19,500 kg Rated load 6,000 kg Bucket capacity 3.5 m³ Overall length 8380mm Overall width 3100mm Overall height 3560mm Bucket width 3170mm Wheel base 3350mm Track base 2360mm Min. ground clearance 470mm Max. dumping height 3300mm Max.dumping reach 1290mm Performance Driving speed    Forward 1 0-8.5km/h Forward 2 0-16.5km/h Reverse 1 0-8.5km/h Grade ability 28° Hydraulic torque converter single stage,4elements Transmission counter shaft Raise time ≤6.8s Total ≤12.5s Tire type 26.5-25  Engine Engine model WEICHAI WD10G270E201 Rated power 199kw Rated rotate speed 2000r/min Max. torque 920n.m Breakout force ≥200 kn

36.8 Tons Crawler Excavator 1.6-1.8 cbm Bucket Capacity Excavator with Rubber Track *High-end first-class core configuration Comply with Stage III emission Cummins engine, with excellent power The Isuzu engine complies with Stage III emissions, saving fuel and energy. International brand main pump and main valve World-brand hydraulic components ensure high reliability of the hydraulic system *Higher reliability and durability Greater reliability and durability Rugged, high-strength body Reinforced boom, stick, and bucket structural parts *More coordinated comfort Silent, comfortable and highly rigid new cab Color LCD monitor for convenient monitoring and maintenance Multiple operating modes available Specifications  MODEL Unit ITQ 385.9 Operating weight Ton 36.8 Bucket capacity  m³ 1.6-1.8 Engine model 五十铃6HK1X Rated power kw/r/min 212/2000 Volume of fuel tank L 595 Travel speed  km/h 5.2/3.3 Swing speed r/min 8.5 Max climbing degree ° 70 Bucket digging force at power max  ISO KN 256 Average grounding pressure KPA 70.8 Hydraulic pump model InLine V90N180/ KPM K5V160DT Maximum flow  L/min 360x2/320x2 Setting pressure MPa 37 Volume of hydraulic tank L 310 A  Overall length  mm 11150 B  Overall width mm 3190 C  Overall height （to top of boom） mm 3280 D  Overall height （to top of cab） mm 3280 E  Counterweight ground clearance  mm 1210 F  Min. ground clearance   mm 495 G  Tail swing radius  mm 3420 H  Track grounding length  mm 4030 J  Track length mm 4955 K  Track gauge mm 2590 L  Track width mm 3190 M  Track shoe width mm 600 N  Turntable width mm 2995 O  Max. digging height mm 9800 P  Max. dumping height mm 6830 Q  Max. digging depth mm 6890 R  Max. vertical wall digging depth  mm 6000 S  Max. digging depth for 2.5m horizontal plane  mm 6800 T  Max. digging reach  mm 10800 U  Max.digging reach at ground level   mm 10600 V  Min. swing radius mm 4285 W  Max. height at min swing radius  mm 8500 X Distance from swing center to rear mm 3420 Z  Height of counterweight  mm 2265 A1 Grounding length (in transportation) mm 5950 Arm length  mm 2900 Boom length  mm 6470

New Hydraulic 4 Tons 4000 KG Diesel Forklift with CE  *The powerful engine with a stable high-efficiency transmission ensures full advantage of torque output *High-quality hydraulic elements specially designed for various working conditions *The well-designed mast provides safer operation and a wider front view. *Compact & refined body and reliable & firm overhead guard guarantees the unique charm of INTERQUIP forklift Specification Specification FD40 1 Fuel model Diesel 2 Load capacity kg 4000 3 Load center mm 500 4 Lift height mm 3000 5 Full free lift height mm 0 6 Fork dimension mm 1070×150×45 7 Mast tilting angle Deg. 6/12 8 Min.turning radius mm 2800 9 Groud clearance mm 135 10 Overhead guard height mm 2230 11 Front overhang mm 500 12 Max travel speed km/h 18.5 13 Max lift speed mm/s 420 14 Max.traction power KN 20 15 Max. gradeability % 20 16 Total length with fork mm 4105 17 Total length without fork mm 3035 18 Total width mm 1400 19 Mast extended height mm 4270 20 Mast lowered height mm 2190 21 Tyres Front 250-15- 12PR 22 Type Rear 7.00-12-12PR 23 Wheelbase mm 1900 24 Tread mm 1160/1065 25 Service weight Kg 5300 26 Battery V/Ah 12/100 27 Engine model XINCHAI 4D30G31 28 Engine power kw/r.p.m 36.8 29 Work press Mpa 18.5