Two Driver ​3.5 Ton Rough Terrain Forklift

Two Drive 2.5ton Diesel Off-Road All Terrain Rough Terrain Forklift Advantages of rough terrain forklifts: 1. Adopt four-wheel drive. 2. The chassis is high. 3. 2.5 ton rough terrain forklift can work on ordinary roads, and can also work on rough roads on mountain roads and mud roads. The tires have strong grip and do not slip. 4. The engine is powerful, and it adopts all-wheel drive and off-road tires. 5. Off road fork truck can run on hills, mountains, beaches, sand, snow, ice and muddy roads, and has good off-road performance. off-road forklifts Specifications: Specifications Power Unit Diesel Operator Type Driver/Seat Transimission Box Type Automatic Transmission Rated Capacity kg 2500 Load Center mm 500 Max.Lifting Height mm 3000 Tire Type Pneumatic Tire Tire Size Front 12-16.5-14PR Rear 27x10-12-12PR Performance Lifting Speed Loaded mm/s 450 Lowering Speed Loaded mm/s 600 Unloaded 300 Traveling Speed Unloaded mm/s 22 Service brake Hydraulic - Pedal Parking brake Mechanical - Manual Max.Gradeability (Loaded) % 17 Front suspension mm 545 Minimum turning radius 2910 Mast Tilting Angle (Fwd/Bwd) deg 5/15 Dimensions Wheelbase mm 1850 Wheel base (front/rear) mm 1250/1205 Minimum ground clearance Mast mm 220 midpoint of the wheelbase 310 Over Length mm 2940 Over Width mm 1550 Overhead Guard Height mm 2210 Fork Size (L×W×T) mm 45x122x1070 Mast Height (Fork lowered) mm 2185 Battery (Voltage/Capacity) V/Ah 12/80 Truck Weight kg 4650 Engine Brand  XINCHANG Model 4D30G31 Rated Power kw/rpm 36.8/2650 Rated torque n-m/rpm 174/1800 Displacement L 2.98

4X4WD Rough Terrain Forklift Truck with Japanese Yanmar Engine Advantages of rough terrain forklifts: 1. Adopt four-wheel drive. 2. The chassis is high. 3. It can work on ordinary roads, and can also work on rough roads on mountain roads and mud roads. The tires have strong grip and do not slip. 4. The engine is powerful, and it adopts all-wheel drive and off-road tires. 5. It can run on hills, mountains, beaches, sand, snow, ice and muddy roads, and has good off-road performance. Specifications: Specifications Power Unit Diesel Operator Type Driver/Seat Transimission Bo× Type Automatic Transmission Rated Capacity kg 3500 Load Center mm 500 Max.Lifting Height mm 3000 Tire Type Tire Size Front 12-16.5-10PR Rear 12-16.5-10PR Performance Lifting Speed Loaded mm/s 420 Lowering Speed Loaded mm/s 600 Unloaded 300 Traveling Speed Unloaded mm/s 22 Service brake Hydraulic - Pedal Parking brake Mechanical - Manual Max.Gradeability (Loaded) % 16 Front suspension mm 590 Minimum turning radius 2910 Mast Tilting Angle (Fwd/Bwd) deg 5/15 Dimensions Wheelbase mm 1840 Wheel base (front/rear) mm 1250/1320 Minimum ground clearance mm midpoint of the wheelbase 250 Over Length mm 3090 Over Width mm 1600 Overhead Guard Height mm 2450 Fork Size (L×W×T) mm 45x150x1070 Mast Height (Fork lowered) mm 2235 Battery (Voltage/Capacity) V/Ah 12/80 x 2 pcs Truck Weight kg 5100 Engine Brand  Model YN4H055-34VE Rated Power kw/rpm 36.8/2400 Rated torque n-m/rpm 185/1600-1800 Displacement L 2.543

20 Ton Forklift Container Handling Equipment Heavy Forklift 20-ton forklift, a heavy-duty container handling equipment designed to excel in moving and managing large containers with unmatched strength and precision. Built for rugged performance in ports, logistics centers, and industrial yards, this heavy forklift combines a 20-ton lifting capacity with robust engineering to handle the demands of container loading, unloading, and stacking. Ideal for heavy-duty operations, it thrives in high-volume environments where efficiency and reliability are critical, ensuring seamless handling of shipping containers and oversized loads. Its durable construction—from reinforced forks to a stable chassis—guarantees stability even under maximum weight, while its powerful engine delivers consistent torque for smooth, controlled movements. Whether you’re managing cargo in a busy port or streamlining container logistics in an industrial facility, this 20-ton forklift is a high-performance solution to tackle your toughest container handling tasks, enhancing productivity and safety in every operation. 20ton forklift Specifications Item  CPCD200 Features Rated Load Kg 20000 Load Center mm 900 Wheelbase mm 4200 Weight Weight kg  30000 Chassis Tire Specs:Front   14.00-24 Tire Specs:Rear 12.00-24 Tires Qty,front/rear(X-dreve wheels) 4/2 Wheel tread:Front mm 2080 Wheel tread:Rear mm 2130 Dimensions Mast/carriage tilt angle(front/rear) Degree(°) 6/12 Mast height(fork lowering) mm 3930 Mast lifting height mm 4000 Max.height mm 5900 height to head guard(height to cab) mm 3360 Overall height（with forks)                                       mm 8500 Fork front verticaal sueface to the rear end of the vehicle  mm 6300 Overall width mm 2930 Fork dimension mm 2200*240*100 Fork carriage width mm 2930 Mast min ground(with load) mm 340 Wheelbase center min ground(with load) mm 420 Min.turning Radius mm 5940 Travel speed(with load/without load) km/h 26/30 Front overhang mm 980 Rear overhang mm 1020 Performance Max.lifting speed(with load/without load) mm/s 260/270 tractionn KN 140 gradeability(with load/without load) % 20/22 Driving brake Hydraulic clamp disvc Engine Engine brand/model WeiChai Engine WD10G220E21（国二） Rated Output 162(Kw) Dongfeng cummins 6CTA8.3-C215-II Rated Output 160(Kw) Cylinder No 6 Others Transmission gears(Front/rear) 2/1

New Generation 6 Ton Wheel Loader  Bucket Capacity: 3.5 m3 Operating Weight: 19500 kg Rated Power: 199 kw 1.electronic transmission  2.joystick controller  3.radio, driving recorder, reversing image; 4.suspension seat 5.air-conditioner optional: 1.automatic lubrication system,rops/fops cabin ,plate-fin water tank ,enlarge water tank ; 2.fuel preheating system,radial tire,quick hitch; Model ITQ968 Specifications Operating weight 19,500 kg Rated load 6,000 kg Bucket capacity 3.5 m³ Overall length 8380 mm Overall width 3100 mm Overall height 3560 mm Bucket width 3170 mm Wheel base 3350 mm Track base 2360 mm Min. ground clearance 470 mm Max. dumping height 3300 mm Max.dumping reach 1290 mm Performance Driving speed    Forward 1 0-8.5 km/h Forward 2 0-16.5 km/h Forward3 0-25 km/h Forward4 0-42 km/h Reverse 1 0-8.5 km/h Reverse2 0-16 km/h Grade ability 28° Transmission counter shaft Raise time ≤6.8 s Fuel tank 230 L Hydraulic tank 270 L Total ≤12.5 s Tire type 26.5-25  Engine Engine model WEICHAI WD10G270E201 Rated power 199 kw Rated rotate speed 2200 r/min Max. torque 920 n.m Max. traction force ≥185 KN Breakout force ≥200 kn

Small Hydraulic Diesel Smart Manual 3.5 Tons 3500 KG Mini Forklift Truck with Triple 4.5 Meters Container Mast *The powerful engine with a stable high-efficiency transmission ensures full advantage of torque output *High-quality hydraulic elements specially designed for various working conditions *The well-designed mast provides safer operation and a wider front view. *Compact & refined body and reliable & firm overhead guard guarantees the unique charm of INTERQUIP forklift Specification Specification FD35 1 Fuel model Diesel 2 Load capacity kg 3500 3 Load center mm 500 4 Lift height mm 3000 5 Full free lift height mm 100 6 Fork dimension mm 1070×125×50 7 Mast tilting angle Deg. 6/12 8 Min.turning radius mm 2550 9 Groud clearance mm 135 10 Overhead guard height mm 2165 11 Front overhang mm 495 12 Max travel speed km/h 19 13 Max lift speed mm/s 480 14 Max.traction power KN 13.5 15 Max. gradeability % 20 16 Total length with fork mm 4065 17 Total length without fork mm 2995 18 Total width mm 1225 19 Mast extended height mm 4265 20 Mast lowered height mm 2060 21 Tyres Front 28x9-15-12PR 22 Type Rear 6.50-10-10PR 23 Wheelbase mm 1700 24 Tread mm 1000/970 25 Service weight Kg 4560 26 Battery V/Ah 12/80 27 Engine model XINCHAI    4D27G31 28 Engine power kw/r.p.m 36.8 29 Work press Mpa 18.5

High Quality Customized 4 WD 3 Ton Handler Loader Telescopic 7 Meters Telescope Forklift 3-ton telescopic handler loader, featuring 4WD capability and a 7-meter reach, is built to deliver exceptional performance across diverse terrains and tasks. Designed for customization, it can be adapted to meet specific operational needs—whether for construction, agriculture, or industrial use—ensuring a perfect fit for your workflow. With 4WD, this telescopic forklift excels in rough, uneven surfaces, providing superior traction and maneuverability in challenging environments like muddy fields or construction sites. Its 7-meter telescoping boom enables precise lifting, stacking, and material placement at height, while the 3-ton capacity handles heavy loads with ease. Crafted with high-quality components for durability and reliability, this handler loader combines power, versatility, and customization to streamline your operations. Ideal for businesses seeking a robust, adaptable tool to tackle varied material handling demands, this 4WD 3-ton telescopic forklift is a smart investment in efficiency and long-term performance. *Yuchai YC4DK90-T304 (66KW) *Pneumatic Tires (16/70-20) *Two-section telescopic arm *System: torque converter *Pump: high-pressure plunger pump with constant pressure and load-sensitive functions *Valve: load-sensitive electronically controlled multi-way valve with constant power *Travel mode: four-turn four-wheel drive, crab travel * Front and rear axles: wet axles *Action mode: electronic control mode *Luxury cab: luxurious and smooth operating table/single cold air conditioning/LED lights/rear sliding windows, etc. *Brake system: hydraulic brake *Mechanical quick connection * Fork distance adjustment *Size:5050*2260*2490mm (Over length to front carriage) *Truck Weight:7000kg Specifications Lifting capacity Rated Load 3000Kg Maximum Lifting Height 7m Maximum Reach 3.93m Weight and Dimensions Total Length (to fork carriage) 5.05m Overall Width 2.26m Height 2.49m Wheelbase 2.80m Ground Clearance 0.36m Turning and Changing Diameter 3.80m Truck Weight 7000Kg Cab width 0.9m Pneumatic Tires 16/70-20 Standard Fork 1200×125×45 Performance Lifting 7.20S Lowering 5.50S Extend 6.50S Retraction 5.40S Uptilt（Filload） 2.90S Downtilting（Unloading） 2.80S Engine Brand Yuchai Emmission Ⅲ Model YC4DK90-T304 Displacement  4-3.621L Rated Power 66Kw Max. Torque 350N.m Transmission System Transmission Type Hydrostatic Transmission Number of Gear F2R2 Max.Speed 32km/h Break Double axle oil penetration multi disc brake Fuel Rank Capacity Hydraulic Oil 380L Diesel Oil 170L