banner
Search
10 results found for "front-end-loader"
  • 5 Ton Wheel Loader with 3 Cubic Bucket Capacity
    5 Ton Construction Machinery 3 cubic wheel loader Bucket Capacity: 3 m3 Operating Weight: 17100 kg Rated Power: 162 kw Model ITQ958 Specifications Operating weight 17,100 kg Rated load 5,000 kg Bucket capacity 3 m³ Overall length 7950 mm Overall width 2870 mm Overall height 3500 mm Bucket width 3000 mm Wheel base 3300 mm Track base 2260 mm Min. ground clearance 470 mm Max. dumping height 3300 mm Max.dumping reach 1400 mm Performance Driving speed    Forward 1 0-11.5 km/h Forward 2 0-38 km/h Reverse 1 0-16 km/h Grade ability 28° Hydraulic torque converter single stage,4 elements Transmission planet-type Raise time ≤6.8 s Total ≤12.5 s Tire type 23.5-25   20 pr Engine Engine model weichai wd10g220e23 cummins 6cta8.3-c215 Rated power 162 kw Rated rotate speed 2000 r/min Max. torque ≥745.3 n.m Breakout force 145 kn
  • New 16-45 Ton Forklift Loader
    Brand New Wheel 32 Ton Forklift Loader Feature: 1.The Z-shaped link mechanism designed espeially for stone operating cnditions features high breakout force and loading capacity and the classic double-rocker structure ensures a broad operating view. 2.The extended wheelbase and wheel tread and ultra-high ballast realize good working stability of the machine. 3.The China-lIl engine, high reliability electronic control countershaft transmission, and the reinforced dry-type drive axle are matched perfectly to save the fuel and reduce the consumption. 4,The higher dumping height and dumping distance, extensive rotation angle scope of forks, and adjustable fork spacing are suitable to diversified operation needs, induding the forklifting and overturning of stones. 5.The 23.5-25 24PR engneering tires are suitable to diversified severe road conditions, featuring powerful off-road performance. The optional tire chains are at your choice. 6.The high ground clerance,small tuming radius, and high depature angle of the classis can adapt to various complicated operation conditions. Specification: Model ITQ32T Operating weight 34,000kg Engine model WD10G270E201 Rated engine power 199kw Rated rotate speed 2200r/nin Max.torque 1100N.m Max.dumping height 3100mm            Rated load 32tons @3100mm height, NO.of shifts Forward 4 For Reverse 2 Forward/Reverse 1 0-6.5km/h Forward/Reverse 2 0-12.3km/h Forward 3 0-24km/h Forward 4 0-41km/h Grade ability ≥25° Turning angle 35°±1° Overall length 10100mm Overall width 3220mm Overall height 3730mm Wheel base 4300mm Track base 3197mm dimension of fork 1500*mm200*mm120mm Torque converter Model: YJ375X3 ratio:3.166 Cycling time 16s Tire type 29.5-25
  • Heavy Duty 5 Ton Loader Mining Use
    5 Ton Heavy Duty Wheel Loader Bucket Capacity: 3 m3 Operating Weight: 17100 kg Rated Power: 162 kw Model ITQ958 Specifications Operating weight 17,100 kg Rated load 5,000 kg Bucket capacity 3 m³ Overall length 7950mm Overall width 2870mm Overall height 3500mm Bucket width 3000mm Wheel base 3300mm Track base 2260mm Min. ground clearance 470mm Max. dumping height 3300mm Max.dumping reach 1400mm Performance Driving speed    Forward 1 0-11.5km/h Forward 2 0-38km/h Reverse 1 0-16km/h Grade ability 28° Hydraulic torque converter single stage,4elements Transmission planet-type Raise time ≤6.8s Total ≤12.5s Tire type 23.5-25   20pr Engine Engine model weichai wd10g220e23 cummins 6cta8.3-c215 Rated power 162kw Rated rotate speed 2000r/min Max. torque ≥745.3n.m Breakout force 145kn
  • New Generation 5 Ton Wheel Loader with Tier II Engine
    5 Ton Front Loading Machine Bucket Capacity: 3 m3 Operating Weight: 17100 kg Rated Power: 162 kw Model ITQ958 Specifications Operating weight 17,100 kg Rated load 5,000 kg Bucket capacity 3 m³ Overall length 7950mm Overall width 2870mm Overall height 3500mm Bucket width 3000mm Wheel base 3300mm Track base 2260mm Min. ground clearance 470mm Max. dumping height 3300mm Max.dumping reach 1400mm Performance Driving speed    Forward 1 0-11.5km/h Forward 2 0-38km/h Reverse 1 0-16km/h Grade ability 28° Hydraulic torque converter single stage,4elements Transmission planet-type Raise time ≤6.8s Total ≤12.5s Tire type 23.5-25   20pr Engine Engine model weichai wd10g220e23 cummins 6cta8.3-c215 Rated power 162kw Rated rotate speed 2000r/min Max. torque ≥745.3n.m Breakout force 145kn
  • Construction Machinery 5 Ton Front End Wheel Loader for Mining Road Use
    958H New Mining Road Wheel Loader Model ITQ958H Specifications Operating weight 17,100 kg Rated load 5,000 kg Bucket capacity 3 m³ Overall length 7950mm Overall width 2870mm Overall height 3500mm Bucket width 3000mm Wheel base 3300mm Track base 2260mm Min. ground clearance 470mm Max. dumping height 3300mm Max.dumping reach 1400mm Performance Driving speed    Forward 1 0-11.5km/h Forward 2 0-38km/h Reverse 1 0-16km/h Grade ability 28° Hydraulic torque converter single stage,4elements Transmission planet-type Raise time ≤6.8s Total ≤12.5s Tire type 23.5-25   20pr Engine Engine model weichai wd10g220e23 cummins 6cta8.3-c215 Rated power 162kw Rated rotate speed 2000r/min Max. torque ≥745.3n.m Breakout force 145kn
  • New Generation Agricultural Machinery Construction Small Front End Wheel Loader with CE
    New Generation Agricultural Machinery Construction Small Front End Wheel Loader with CE 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   918 Rated load kg 1500 Operation total weight kg 3800 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 2100 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3800 Max unloading height mm 3200 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29
  • Brand New 700 kg 0.7 kg Mini Electric Wheel Loader
    400 kg 600 kg 700 kg 800 kg Diesel / Electric Mini Wheel Loader for Farm/Garden Product features: Four wheel drive, full power. Advanced AC controller and CANbus data bus technology Long endurance of the equipment Electric front end loader Can be turned over to facilitate maintenance Comfortable operation and stable driving Pure electric system has the advantages of high efficiency Zero exhaust emission Low noise Environmental protection and energy saving Suitable for indoor and outdoor use with lower cost Optional Attachment Specification Main parameter Operating weight 2450Kg Load rating 700Kg Moving speed 0-18km/h Moving motor Motor type           Permanent magnet synchronous motor Rated power of motor 20kw Motor Duty Rating Duty with non-periodic load and speed variations Oil Pump Motor Rated power of motor 10Kw Motor Duty Rating Duty with non-periodic load and speed variations Battery Battery Type Lithium iron phosphate Battery Voltage 144V Battery rated capacity 155Ah(standard) Battery weight 260Kg Charging time AC220V Charge:3h Operating time with full load 3.5h Operating time with rated load 4-5h Intermittent operation time 5-6h Theoretical lifespan 25 ℃ 0.5c charge and discharge for 3000 times, and the capacity shall not be less than 80% of the nominal capacity Driving system Operating voltage of driving system 144V  Electrical system Voltage of electrical system 12V Tripping load with bucket(Refer to ISO8313) Tripping load  when  straight line driving   1250Kg Tripping load  when  full turn 900Kg Hydraulic drive system Displacement 12 cc Working pressure 170bar Hydraulic oil capacity 30L Tyre Specifications 26Í12-12 AS Total width 1104mm Dimension Width of protective device 990mm Ground clearance 178mm Tire center width 803mm Total width 1104mm Maximum working height 3630mm Maximum bucket fulcrum height 2900mm Bucket level status height 2649mm Tipping height 2228mm Working distance (tipping state) 690mm Shovel depth 120mm Pivot to bucket lift pin 550mm wheelbase 1550mm Rear overhang 948mm Total length without bucket 3550mm Total length with standard bucket 4330mm Seat height 1208mm Height to top of protective device 2290mm Angle of maximum lifting height 48º Maximum tipping angle 45º Departure angle 24º Corner 45º Maximum turning radius 2530mm Outer edge radius 2200mm Inner turning radius 1110mm
  • Brand New Agriculture Small Front End Wheel Loader
    Brand New Agriculture Small Front End Wheel Loader 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   916 Rated load kg 1200 Operation total weight kg 3500 Overall Length mm 5100 Overall Width mm 1800 Overall Height mm 2750 Spread of axles mm 2150 Wheelbase mm 1800 ground clearance mm 200 Bucket width mm 1800 Turning radius (tyre center) mm 4500 Turning radius (outside of bucket in transportation position) mm 5500 Max Working height mm 3500 Max unloading height mm 3000 max unloading distance mm 800 Max steering angle ° 32 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   20.5-16 Rated power (Yunnei)  kW 37/42/58 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 0.8 Bucket capacity(Long arm)option m³ 0.8 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 100 Max traction KN 98 Max climbing ablity ° 29
  • Construction Machinery Small Front End Wheel Loader
    Construction Machinery Small Front End Wheel Loader 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   920 Rated load kg 1800 Operation total weight kg 4700 Overall Length mm 5700 Overall Width mm 2000 Overall Height mm 2850 Spread of axles mm 2250 Wheelbase mm 2200 ground clearance mm 240 Bucket width mm 2000 Turning radius (tyre center) mm 4800 Turning radius (outside of bucket in transportation position) mm 5800 Max Working height mm 4000 Max unloading height mm 3500 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   1670-20 Rated power (Yunnei)  kW 76 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 1 Bucket capacity(Long arm)option m³ 1 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 120 Max traction KN 110 Max climbing ablity ° 29
  • Small Wheel Loader Front End Loder in Agriculture
    Small Wheel Loader Front End Loder in Agriculture 1. Humanized design 2. European-style appearance, luxurious interior cab. 3. Full glass cockpit door, wide field of vision 4. Brake pipe with protective cover 5. The unique external setting of the injector is convenient for concentrated oil injection. 6. Fine line design, reasonable pipeline layout, easy maintenance 7. Automatic leveling, reducing driver fatigue  Specification Model   925 Rated load kg 2500 Operation total weight kg 5800 Overall Length mm 6100 Overall Width mm 2100 Overall Height mm 2850 Spread of axles mm 2050 Wheelbase mm 2250 ground clearance mm 240 Bucket width mm 2200 Turning radius (tyre center) mm 4800 Turning radius (outside of bucket in transportation position) mm 5800 Max Working height mm 4000 Max unloading height mm 3500 max unloading distance mm 800 Max steering angle ° 38 Trinomial sum sec 10.5 Working hydraulic system pressure Mpa 18 Tyre   1670-24 Rated power (Yunnei)  kW 92 Rated power (Yunnei)  kW   Rated speed r/min 2200 Bucket capacity m³ 1.3 Bucket capacity(Long arm)option m³ 1.3 Max speed km/h 38 Forward gear I km/h 6.8 Forward gear II km/h 12 Rear gear I km/h 6.5 Rear gear II km/h 11.8 Max breakout force KN 120 Max traction KN 110 Max climbing ablity ° 29

A total of 1 pages

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

About

contact